Comprehensive LAN Router

The Edge platform is a fully functional Later-3 router. It has the ability to handle static routing, RIPv2, and OSPFv2. The Edge Router also support VLAN tagging for switched networks.

Managing The Local Network

XRoads Networks' EdgeXOS appliances are hybrid bridge/router systems which enable localized routing across the LAN and DMZ interfaces. Hundreds of custom routes can be added to the EdgeXOS appliance along with the ability to connect the appliance to various switches in order to manage separate VLAN traffic and shape and accelerate applications across those separate network within your organization.

Routing Protocols

XOS Preview

When the Edge platform is acting as the network gateway it is sometimes required to re-route traffic to other devices/routers which act as gateways for other departments, branches, etc. In these cases the administrator can setup static routes to forward data destine for the networks defined in those routes to be forwarded to the provided gateway.

The Edge platform also support dynamic routing using RIPv2 and OSPFv2. Both of these routing protocols can available via our command line interface, which is accessible via SSHv2 and the console port.

VLAN Tagging

XOS Preview

The Edge supports VLAN tagging for each of its interfaces, however it is recommended that only the LAN interface or a DMZ interface be used in conjunction with VLANs.

WAN ports can not be used with VLANs and still be able to test for network outages and thus can only be defined using VLAN tagging when the WAN interfaces are nailed up.